The Ultimate Guide to Self-Reliant Living by Jay Cassell

Author:Jay Cassell
Language: eng
Format: epub, mobi
Publisher: Skyhorse Publishing
Published: 2013-01-01T00:00:00+00:00

The Figure-Four Trap, already described in another part of this book, is also well adapted to the dead-fall, and is much used. It should be made of stout pieces and erected at the opening of the pen, with the bait pointing toward the interior, the heavy log being poised on its summit.

The Garrote

There is another variety of trap, somewhat resembling the dead-fall, but which seizes its prey in a little different manner. This trap, which we will call the Garrote, is trutily represented by our illustration. A pen is first constructed, similar to that of the dead-fall. At the opening of the pen, two arches are fastened in the ground. They should be about an inch apart. A stout forked stick should then be cut, and firmly fixed in the earth at the side of the arches, and about three feet distant.

Our main illustration gives the general appearance of the trap, but we also subjoin an additional cut, showing the “setting” or arrangement of the pieces. They are three in number, and consist: First, of a notched peg, which is driven into the ground at the back part of the pen, and a little to one side. Second, of a forked twig, the branch of which should point downward with the bait attached to its end. The third stick being the little hooked piece catching beneath the arches. The first of these is too simple to need description. The second should be about eight inches long; a notch should be cut in each end. The upper one being on the side from which the branch projects, and the other on the opposite side of the stick, and at the other end, as is made plain by our illustration. The third stick may consist merely of a hooked crotch of some twig, as this is always to be found. Indeed, nearly all the parts of this trap may be found in any woods; and, with the exception of a jack-knife, bait, and string, the trapper need not trouble himself to carry any materials whatever. When the three pieces are thus made the trap only awaits the “Garrote.” This should be made from a stiff pole, about six feet in length, having a heavy stone tied to its large end, and a loop of the shape of the letter U, or a slipping noose, made of stout cord or wire, fastened at the smaller end. To arrange the pieces for their destructive work, the pole should be bent down so that the loop shall fall between the arches. The “crotch stick” should then be hooked beneath the front of the arch, letting its arm point inward. After this the bait stick should be placed in its position, with the bait pointing downward, letting one end catch beneath the notch in the ground-peg, and the other over the tip of the crotch stick. This done, and the trap is set.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.